The Gordon Research Seminar on Corrosion - Aqueous is a unique forum for graduate students, post-docs, and other scientists with comparable levels of experience and education to present and exchange new data and cutting edge ideas.
The focus of this meeting is on novel approaches, ideas, techniques, and methods used to address today's pressing corrosion issues. This meeting brings together the future of the corrosion field to learn from one another, network and build connections that will serve to solve emerging global issues as their careers grow.
This GRS was held in conjunction with the "Corrosion - Aqueous" Gordon Research Conference (GRC)
. Refer to the associated GRC program page
for more information.
Final Meeting Program
|2:00 pm - 5:00 pm||Arrival and Check-in|
|3:30 pm - 3:45 pm||Introductory Comments by GRC Site Staff / Welcome by the GRS Conference Chair|
|3:45 pm - 4:30 pm||Keynote Session: Career Evolution in Corrosion Science|
|We are pleased to have one of the most distinguished and accomplished researchers in our field, Dr. Hugh Isaacs of Brookhaven National Laboratory, present to give his take on the corrosion research field and his experiences.|
|Discussion Leaders: Nazhen Liu (Western University, Canada) and Hesham Mraied (University of South Florida, USA)|
|3:45 pm - 3:50 pm||Opening Remarks|
|3:50 pm - 4:20 pm||Hugh Isaacs (Brookhaven National Laboratory, USA)|
"Identifying Localized Corrosion Components"
|4:20 pm - 4:30 pm||Discussion|
|4:30 pm - 6:00 pm||Poster Session|
|7:30 pm - 9:30 pm||Advancing Techniques to Advance Corrosion Research|
|In this session we will be hearing of new and powerful approaches that may become integral tools to corrosion researchers in the future. The topics range from potentiometric methods, phase field modelling, in-situ monitoring, microscopy and alloying approaches.|
|Discussion Leader: Jayendran Srinivasan (University of Virginia, USA)|
|7:30 pm - 7:45 pm||Vijayshankar Dandapani (Max Planck Institute for Iron Research, Germany)|
"A Novel Potentiometric Approach to a Quantitative Characterization of Oxygen Reduction Kinetics at Buried Metal – Organic Coating Interfaces"
|7:45 pm - 7:55 pm||Discussion|
|7:55 pm - 8:10 pm||Quentin Sherman (Northwestern University, USA)|
"Phase Field Modeling of Oxide Growth"
|8:10 pm - 8:20 pm||Discussion|
|8:20 pm - 8:35 pm||Angus Cook (University of Birmingham, United Kingdom)|
"Cost-Effective High-Throughput In-Situ Monitoring of Atmospheric Pitting Corrosion of Stainless Steel"
|8:35 pm - 8:45 pm||Discussion|
|8:45 pm - 9:00 pm||Wilfred Binns (University of Western Ontario, Canada)|
"SECM Investigation of
Local Cathodes on Al Brazing Sheet Alloys"
|9:00 pm - 9:10 pm||Discussion|
|9:10 pm - 9:25 pm||Krista Limmer (U.S. Army Research Laboratory, USA)|
"Decelerating the Corrosion of Magnesium Through Reduction of Hydrogen Evolution Kinetics by Alloying"
|9:25 pm - 9:30 pm||Discussion|
|7:30 am - 8:30 am||Breakfast|
|9:00 am - 11:00 am||Lightweight Alloys: A Heavy Topic Across Many Industries|
|In this session, the discussions will focus on one of the most prominent research fields in corrosion, lightweight alloys. Different aspects of the corrosion behaviours of Mg and Al alloys will be investigated.|
|Discussion Leaders: Sara Cantonwine (The Ohio State University, USA) and Ashlee Wingersky (Arizona State University, USA)|
|9:00 am - 9:15 am||Taylor Cain (University of Virginia, USA)|
"Evaluation of the Potential Range of Model Mg-Based Anodes for the Sacrificial Cathodic Protection of Mg Alloy AZ31B-H24"
|9:15 am - 9:25 am||Discussion|
|9:25 am - 9:40 am||Litao Yin (Royal Institute of Technology, Sweden)|
"A FEM Model for Investigation of Micro-Galvanic Corrosion of Al Alloys and Effects of Deposition of Corrosion Products"
|9:40 am - 9:50 am||Discussion|
|9:50 am - 10:05 am||Oumaima Gharbi (Chimie ParisTech, France)|
"In Situ Measurement of Alloy Dissolution During the Surface Treatment of Al Alloys"
|10:05 am - 10:15 am||Discussion|
|10:15 am - 10:30 am||Jeanette Torrescano Alvarez (The University of Manchester, United Kingdom)|
"Investigation of the Dependence of Film Morphology on Oxygen Generation During Anodizing of AA 2024 Alloy"
|10:30 am - 10:40 am||Discussion|
|10:40 am - 10:55 am||Noemie Ott (Monash University, Australia)|
"Towards a Better Understanding of the Sensitisation/Resensitisation Behaviour in Al-Cu-Li AA2050 Alloys"
|10:55 am - 11:00 am||Discussion|
|11:00 am - 12:30 pm||Poster Session|
|Coffee will be served in the poster area from 11:00 am - 11:30 am|
|1:30 pm - 2:30 pm||When All Else Fails: Put a Coating on It|
|Coatings are a long studied, yet highly developing area of our field and their importance will be discussed in this section looking at copper and tin based coating systems on steels.|
|Discussion Leaders: Shilpa Kumari (Norwegian University of Science and Technology, Norway) and Claudia Merola (Max Planck Institute for Iron Research, Germany)|
|1:30 pm - 1:45 pm||Joseph Turnbull (University of Western Ontario, Canada)|
"Corrosion of Cu Coated Nuclear Waste Containers in Aerated Nitric Acid"
|1:45 pm - 1:55 pm||Discussion|
|1:55 pm - 2:10 pm||Natalie Wint (Ohio State University, USA)|
"The Kinetics and Mechanism of Atmospheric Corrosion Occurring on Tin and Iron-Tin Intermetallic Coated Steels"
|2:10 pm - 2:20 pm||Discussion|
|2:20 pm - 2:30 pm||Closing Remarks|
|2:30 pm - 3:00 pm||Evaluation Period|
|Fill in GRS Evaluation Forms|
|3:00 pm||Seminar Concludes|
This material is based upon work supported by the U.S. Department of Energy, Office of Science, under Award Number DE-SC0015883. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.